What are the precautions when cutting plexiglass?

 👇The plexiglass is a clear and hard acrylic, If you want to handle Plexiglass perfectly, then the CNC router machine is your best choice.Key factors to be aware of when cutting plexiglass：

1.CNC router bits and fixed materials
2.Set The Correct Feed Rate
3.Set the correct RPM
4.Set the cut depth
5.Use The Ramp Feature

👉BuyCNC has a variety of CNC milling machines with vacuum suction tables, all of which can perfectly cut acrylic materials such as plexiglass. If you want to buy, you can contact us immediately!
https://buycnc.com/how-to-cut-the-plexiglass-by-cnc-router/
https://buycnc.com/wood-cnc-router/4x8-cnc-router/
https://buycnc.com/making-kitchen-cabinet-body-door/

评论

发表评论

此博客中的热门博文

Maintenance and maintenance of engraving machine in low temperature environment

图片
 Due to the extremely cold winters and cold temperatures, the majority of engraving machine users need to pay attention to maintenance and maintenance. Based on our experience in manufacturing, working and after-maintenance of engraving machines, engraving machines are precision CNC equipment and are needed every day. Maintenance and maintenance are very important to the service life and accuracy of this machine. Observe the following maintenance and maintenance requirements, especially in winter: Precautions for engravers with water-cooled spindles: Engravers with water-cooled spindles prevent the water tank where the water cycle is located from freezing as the temperature drops, interrupting the water cycle and preventing the motor from cooling. To prevent it, you need to pay attention to the room temperature. User: The temperature is too cold in winter. If the temperature in the workplace where the engraving machine is stored is below zero, it is best to use an antifreeze agent....
阅读全文

The Importance of Adding Water To The Stone Carver

图片
Both standard stone carvers and tombstone carvers are double cooled. Since the stone is hard, it is necessary to water-cool the cutter head during work, but water-cool the spindle so that the spindle temperature does not become too high. It plays a specific protective role. However, if the customer does not pay attention or follow the training procedure, the phenomenon of dry combustion without water may occur, which may cause serious damage to the machine itself. First , the dry combustion of the spindle of a stone engraver is most likely to cause excessive heating of the spindle, and the temperature is too high to cause combustion. Normally, after the spindle has burned, the broken spindle must be returned to the factory for repair. Then repair and return it from the factory. Normal processing time is significantly delayed. Therefore, when the customer does the processing, it is necessary to follow the training of the technician to ensure the normal use of the machine and extend the ...
阅读全文

Classification of CNC machining centers

图片
 😊 The CNC machining center is a kind of CNC machining machine with complete functions. The machining center is equipped with a tool magazine, which stores different numbers of various tools or inspection tools, which are automatically selected and replaced by the program during the processing. This is the main difference between it and CNC milling machine and CNC boring machine. Especially for workpieces that must use tooling and special equipment to ensure product quality and efficiency. This will save a lot of time and cost for the development and remodeling of new products, so that the company has strong competitiveness. 👉 BuyCNC sells CNC machining centers, if you need them, please contact us. https://buycnc.com/cnc-router-installation-gantry/ https://buycnc.com/milling-machine-for-mold-furniture/
阅读全文