The Importance of Adding Water To The Stone Carver

Both standard stone carvers and tombstone carvers are double cooled. Since the stone is hard, it is necessary to water-cool the cutter head during work, but water-cool the spindle so that the spindle temperature does not become too high. It plays a specific protective role. However, if the customer does not pay attention or follow the training procedure, the phenomenon of dry combustion without water may occur, which may cause serious damage to the machine itself.

First, the dry combustion of the spindle of a stone engraver is most likely to cause excessive heating of the spindle, and the temperature is too high to cause combustion. Normally, after the spindle has burned, the broken spindle must be returned to the factory for repair. Then repair and return it from the factory. Normal processing time is significantly delayed. Therefore, when the customer does the processing, it is necessary to follow the training of the technician to ensure the normal use of the machine and extend the application cycle of the machine.

Second, if the lithograph engraving machine spindle is not cooled with water, it will always be in a state of continuous high temperature heating. It is easy for the spindle to swing or shift. Engraving is fast, slow and unstable. While affecting accuracy, misalignment of the spindle causes misalignment of the engraved sample. The engraved sample is naturally infinite with many loopholes.

https://buycnc.com/cnc-router/cnc-wood-router-woodworking-milling-machine-for-sale/

https://buycnc.com/cnc-milling-steel-plate/