Five common obstacles and solutions for engraving spindle motors

BuyCNC specializes in manufacturing various CNC engraving machines.

1. Multi-process woodworking engraving machine spindle motor is hot:

Solution: First check if the water pump is working and then check if the circulating water is low at the liquid level.

2. I feel that the spindle motor is not strong enough to rotate.

Solution: Check the circuit to see if the motor line is out of phase or if the cable line is shorted.

3. The motor makes a strange noise:

Solution: Check if the motor is overloaded. The motor may be defective and must be repaired or replaced in time.

4. Reverse rotation of motor:

Solution: Check directly for phase in the motor line or change the output UVW end.

5. Multi-process woodworking engraving machine has one axis without rotation:

Solution: Check if the drive block corresponding to the corresponding axis of the multi-process woodworking machine is damaged.

f:id:BuyCNC:20201205113829g:plain

BuyCNC